Iowa Industrial Moderated Newsgroup For Surplus Equipment > Food Service
> Meat Grinders
> Used
> Atmel AT91SAM7S256 arm ARM7 header dev. board jtag usb
Atmel AT91SAM7S256 arm ARM7 header dev. board jtag usb
AT91SAM7S256 ARM development board
HEADER board for microcontrollers AT91SAM7S64/128/256/512 ARM7TDMI-S - the universal board enabling easily and quickly to start to work with ATMEL ARM microcontrollers.
Fully compatible with WIGGLER ARM JTAG
- MCU: AT91SAM7S256 16/32 bit ARM7TDMIâ„¢ with 256K Bytes Program Flash, 64K Bytes RAM, USB 2.0, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60MHz operation
- perfect solution for building custom USB peripherials
- standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- VREF jumper for select ADC reference voltage
- TEST jumper, for SAM-BA downloading
- on board voltage regulator 3.3V with up to 800mA current
- single power supply: through USB or from extension header pin
- power supply filtering capacitor
- extension headers for all uC ports + ADC ports RST and power supply
- PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
2) Bank transfer (bank account in Germany)
You can download documentation for this board (schematic, components placement, dimensions in mm):
AT91SAM7S128 ARM development board
(also available versions with AT91SAM7S256 controllers)
HEADER board for microcontrollers AT91SAM7S64/128/256/512 ARM7TDMI-S - the universal board enabling easily and quickly to start to work with ATMEL ARM microcontrollers.
Fully compatible with WIGGLER ARM JTAG
- MCU: AT91SAM7S128 16/32 bit ARM7TDMIâ„¢ with 128K Bytes Program Flash, 32K Bytes RAM, USB 2.0, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60MHz operation
- perfect solution for building custom USB peripherials
- standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- VREF jumper for select ADC reference voltage
- BDS jumper, for SAM-BA downloading
- on board voltage regulator 3.3V with up to 800mA current
- single power supply: through USB or from extension header pin
- power supply filtering capacitor
- extension headers for all uC ports + ADC ports RST and power supply
- PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
2) Bank transfer (bank account in Germany)
You can download documentation for this board (schematic, components placement, dimensions in mm):
___________________________________________________________________________
Attenzione, si avvertono gli eventuali compratori italiani, che al recapito del pacco, si dovranno pagare altri 8..13,44 EURO di spese doganali.
