Iowa Industrial Moderated Newsgroup For Surplus Equipment > Food Service
> Ovens
> New
> Rotary table 4AXIS cnc centroid control option m-400 39
Rotary table 4AXIS cnc centroid control option m-400 39
150mm (5.9") Rotary Table Package for your existing Centroid Mill control.
Designed for use with any model Centroid M series Control. This versatile, easy to program 4th axis Rotary table can be purchased with AC (brushless) or DC (brush) servo motor. This rotary table package offers affordable 4 axis machining capability for your current Centroid powered milling machine, router, water jet, or other application. All Centroid electronics are made in the USA based on proven reliable, user friendly, CENTROID DSP technology. You will receive everything required to install this rotary axis onto your Centroid CNC control. Click on Store home (at the left) to see all available sizes and models.
Programmable Rotary Table Features include:
* 150mm (5.9") rotary face plate.
* Can be used spindle up (vertical) or horizontal.
* 360 degrees rotation in 2.7 seconds with DC servo.
* Runs on Your Centroid CNC control.
* Homing switch assures perfect repositioning at power up.
* Position command from your G-code program.
* Pneumatic brake can lock your table in position while machining.
* Optional 3 jaw chuck with adaptor plate #SC-6
* Optional Matching height tailstock #TSA-530 or adjustable height tailstock ATS-2
* Optional 5C adaptor. Bolts onto the face plate #5CC-1
* Fully supported. No annual service contracts needed.
Center Height in Vertical (mm / inch)
Table Height in Horizontal (mm / inch)
Thru-Hole Diameter (mm / inch)
Width of Guide Block (mm / inch)
Overall Dimensions H / W / L (inch)
Ø 1 each 150mm rotary table head.
Ø 1 each DC single servo driver with additional fiber optic cable.
Ø MS connector that will mount onto your electrical enclosure.
Ø Wiring layout to follow during installation.
Ø The 4th axis software unlock.
Ø 4 axis upgrade of your Intercon conversational software.
Ø Lifetime technical support from Machines in Motion Inc.
Available, by phone and Email. Typical Email response is less than 24 hours.
Machines in Motion will provide you with any related factory technical documents as needed.
Professional installation is available for this item.
Optional 3 jaw chuck with adaptor plate #SC-6
Optional Matching height tailstock #TSA-530 or adjustable height tailstock ATS-2
Optional 5C adaptor. Bolts onto the face plate #5CC-1
5C collet set 1/8" - 1" by 1/8" increments. Set of 8 peices
5C collet set 1/8" - 1 1/16" by 1/16" increments. Set of 16 pieces
5C collet set 1/8" - 1" by 1/32" increments. Set of 31 pieces
Choose this package to integrate with your Centroid CNC control using DC servo motors. If your Centroid CNC control has AC servo motors then you will need to choose this AC package.
