Iowa Industrial Moderated Newsgroup For Surplus Equipment > Industrial Machine Repair
> Nuts and Bolts
> New
> Commercial hand dryer surface mounted automatic std
Commercial hand dryer surface mounted automatic std
MODEL DA, DA5, DXA5 SERIES SURFACE MOUNT STAMPED STEEL COVER
* The new light weight steel cover with the classic World Dryer look
* Models DA and DXA5 provide the economy of steel for lighter traffic areas
* Available in push button and automatic
* Warranty backed by convenient nationwide parts and service network
* The unit weighs only 18 lbs and provides dependable performance and reliable operation
* Cover construction of .08" (2mm) thick cold rolled drawn steel
* Exposed areas are appliance grade baked epoxy enamel for durability
* Two tamper-resistant screws lock cover securely to base
* Internal parts are plated with corrosion-resistant material
* Tamper resistant air intake grill of 304 stainless steel
* Motor is a universal type open frame 1/10 HP, 6900 RPM at rated load with resilient mountings, ball bearing construction and dynamic balanced rotor
* Heating element mounted at air exit for maximum heating efficiency
* Mechanical timer (Model DA-push button) operates dryer for 30 or 40 seconds with push button activation. Switch 20 Amp rating
* Reflective infrared sensor (Model DXA5-automatic) detects hands, initiates and terminates drying automatically. 100 seconds vandal defeat circuit.
* 10 year limited parts warranty
MODEL DA, DA5, DXA5 SERIES SURFACE MOUNT STAMPED STEEL COVER
To order flush style nozzle, specify #DA5E (push button).
*50Hz units available for Export Markets only.
The DA unit can be installed as a recessed dryer using kit #KDRA-973 Brushed Stainless Steel Trim or #KDRA-974 White Epoxy Painted Steel Trim
MODEL DA, DA5, DXA5 SERIES SURFACE MOUNT STAMPED STEEL COVER
11 3/8" W x 9 5/8" H x 6 5/8" D
Recommended Mounting Height (Distance from floor to bottom of dryer)
MOUNTING DIAGRAM - SURFACE MOUNT
*Refer to recommended mounting height table
MOUNTING DIAGRAM - RECESSED MOUNT
*Refer to recommended mounting height table
Average traffic washroom - 1 dryer per 2 washbasins
Heavy traffic washroom - 1 dryer per washbasin
54" Bradley sink - 4 dryers per sink
Hand dryers should be placed at least 2 feet apart, near but not over the washbasin. In congested areas dryer should be placed to create a traffic flow from washbasin to dryer to exit.
Hand dryers require a dedicated circuit and must be properly grounded.
GFI Circuit protection is recommended.
One side of dryer should be mounted to stud.
Specification Guide - Model A, XA5, RA, XRA5
Hand dryers shall be manufactured by World Dryer to include a 1/4" thick cast iron cover. Cover to be finished with porcelain enamel. Motor shall be of the universal type, 1/10 HP at 7500 RPM. Dryer shall deliver 7300 linear feet of air per minute (LFM). Hand Dryers shall be activated by means of a push button control device.
Automatic Dryers shall be activated by means of an infrared emitting/receiving electronic control device. Timer shall be mechanical, cam-operated type. Recessed units will include a 16-gauge steel wall-mounting box. Hand dryer shall be listed under re-examination service of Underwriters' Laboratories, Inc., and certified by the Canadian Standards Association.
Specification Guide — Model DA, DA5, DXA5
Hand dryers shall be manufactured by World Dryer to include a 2mm thick drawn steel cover with a baked epoxy enamel finish. Motor shall be of the universal type, open frame, 1/10 HP at 6900 RPM. Dryer shall deliver 6900 linear feet per minute (LFM). Model DA shall be activated by means of a push button control device. Timer shall be mechanical with 20 Amp switch. Model DXA5 shall be operated by means of a reflective infrared sensor. Hand dryers shall be listed under the re-examination service of Underwriters Laboratories, Inc., and approved by the Canadian Standards Association.
CLICK HERE TO VIEW MORE COMMERCIAL HAND DRYERS PRODUCTS
