Iowa Industrial Moderated Newsgroup For Surplus Equipment > Industrial Machine Repair
> Nuts and Bolts
> New ( ) birmingham ycl-1440-gh lathe
New ( ) birmingham ycl-1440-gh lathe
FREE FREIGHT On This Order Anywhere in The Continental US ** NOTE: Any Residential/Tailgate or Re-Delivery Charges NOT INCLUDED
PRICE GUARANTEE: IF YOU FIND THIS EXACT LATHE ADVERSTISED ANYWHERE ELSE THEN
• D1-4 spindle with 1 1/2" bore
• 40 kinds of inch threads from 4-112 tpi
• Removable gaop bed for large diam. work
• Magnetic controls and spindle foot brake
• T-slotted compound and front pull-out chip tray
• Main spindle hardened & precision ground
• Bed made of fine grain high tensile cast iron
• Bedways induction hardened & precision ground
• All gears & shafts hardened & precision ground
• Main spindle supported at 3-point by precision bearings
• Tool kit with tools & leveling pads
• 5-C lever type collet closer
Distance between centers - 40"
Max. swing over cross slide- 8 5/8"
Effective length in gap - 6 1/4"
Spindle nose (spindle mount) D1-4
Diam. of spindle thru bore - 1 1/2"
Spindle taper (with sleeve) M.T. 5 (M.T. 3)
Spindle speeds - 45-1800rpm, 16 steps- 45,70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800, rpm
Longitudinal Feeds - 0.0012-0.0294"/ REV. (40 kinds)
Cross feeds - 0.0003-0.01" Rev. (40 kinds)
Inch threads - 4-112 tpi (40 kinds)
Metric threads - 0.45-7.5 mm (22 kinds)
Diam. of long leadscrew - 7/8"
Pitch threads of long leadscrew - 8 tpi
Max. travel of cross slide - 7"
Max. travel of compound slide - 4"
Diam. of tailstock quill - 2 3/4"
Taper of tailstock quill center M.T. 3
Max. travel of tailstock quill - 4 3/4"
Power of main motor - 3HP, 220V 3 PH, 2 speed
Power of coolant pump - 1/8 HP, 220V, 3 PH
Overall Dim. (l x w x h) -72" x 31" x 49"
