Iowa Industrial Moderated Newsgroup For Surplus Equipment > Manufacturing Equipment
> Grinders
> Needing Repair
> 60 ton geka 55A hydraulic ironworker used
60 ton geka 55A hydraulic ironworker used
One Preowned Geka Hydraulic Ironworker
"Non-deform cut" with no material lose
Angles square: 4" x 4" x 1/2" or 5" x 3" x 1/2" or 5" x 3-1/2" x 3/8"
Angles on 45 degree mitre (leg in): 3" x 3" x 5/16"
"Non-deform cut" with no material lose
Flat bar: 12" x 9/16" or 8" x 3/4"
Punching capacity: 1-1/8" thru 1/2" or 3/4" thru 3/4"
Section shear blades for angles with patented non-deform cutting action with capability
of cutting equal and unequal leg angles at both 90 and 45 degress (leg in only).
Bar shear blades for rounds and squares
Two-cylinder operation with two remote foot pedals and with hydraulics which will allow
simultaneous operation (Independently controlled) of punch and shearing stations (both
cylinders) to the total operating tonnage of machine.
Support and mitre talbe for plate shear
3/60/220/440 motor and controls. Low voltage at the controls.
A structural die holder is provided to allow the punching of the flanges in channels and I-beams.
Delivery: Stock, Subject to Prior Sale
Jeff Huntsman, Sales (***)-897-1110 ****@yahoo.com
For any question and for more info please visit
