Iowa Industrial Moderated Newsgroup For Surplus Equipment > Manufacturing Equipment
> Lathes
> Used
> Pulsatron series e plus metering pump LP8HMA-wtcb-xxx
Pulsatron series e plus metering pump LP8HMA-wtcb-xxx
LPH8 Pulatron Series E Plus Chemical Metering Pump - 600GPD, 25.0 GPH
Retail Price: $1350.00 (with these options)
This pump is great for large chemical pumping applications; refer to chemical resistance chart for use with specific chemicals at http://www.novatech-usa.net/docs/Chemical_Resistance_Guide.pdf (including chlorine injection for a very large pool!)
The Pulsatron Series E Plus is a solenoid driven chemical injection-dosing-metering pump which offers manual control over stroke length and stroke rate with the option to choose between 4-20mA or external pacing inputs for automatic control. This series is agency approved and water resistant for demanding outdoor and indoor applications.
* Reliable metering performance. Guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. The timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI, and other electrical disturbances.
* Rated 'hot' for continuous duty. Seres E Plus pumps continue to meet their specifications for pressure and capacity even during extended use. That's because of its high quality solenoid and special enclosure that effectively dissipates heat.
* High viscosity capability. A straight flow path and ample clearance between the diaphragm and head enable standard Pulsatron pumps to handle viscous chemicals up to a viscosity of 3000 CPS. For higher viscosity applications, larger, spring-loaded connections are available.
* Leak-free, seal less, liquid end. Our diaphragms are of superior construction - PTFE-faced, bonded to a composite of Hypalon and fabric layers, and reinforced with a metal insert for optimum flexibility and durability.
Includes: a weighted foot valve/strainer assembly, a bleed valve assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 4' bleed/return tubing, 8' discharge tubing and Owners Manual.
Specifications: LP8HMA-WTCB-XXX
S = with Off-On Switch, Manual Controls Only
E = with Auto-Off-Manual Switch with External Pacing Stroke Input and Stop Function Input
M = with Auto-Off-Manual switch with 4-20mA Stroke Rate Control Input and Stop Function Input
A = 115VAC, 50/60Hz, 1ph with 6' 3-wire US Plug (ETL Listed Mark)
B = 230VAC, 50/60Hz, 1ph with 6' 3-wire US Plug (ETL Listed Mark)
1 = 115VAC, 50/60Hz, 1ph with 6' 3-wire US Plug
2 = 230VAC, 50/60Hz, 1ph with 6' 3-wire US Plug
P = GFPPL (Polypropylene) Black
W = PVC (PolyVinyl Chloride) Gray
B = Tubing 3/4" OD Clear PVC (Suction) and Translucent PE (Discharge), No Bleed Valve
