Iowa Industrial Moderated Newsgroup For Surplus Equipment > Manufacturing Equipment
> Lathes
> Used
> miller xmt 300 cc/cv inverter mig tig stick welder
miller xmt 300 cc/cv inverter mig tig stick welder
Miller XMT 300 cc/cv with auto link, you can hook to any power from 208 - 460 volt ac and it will link up and start welding for you,
this is a single or three phase imput machine,
puts out over 300 amps of DC welding power, will stick, tig, or mig weld, you can hook many different items to this welder for enhanced welding ie: spoolguns, mig wire feeders, stick electrode, tig torches, pulser units, ect,
i had this unit checked at a local welder repair shop, it works very well, was tested for all functions, cc/cv, the 14 pin plug was checked good, it worked in both 220 and 440 volt imput, and 220 single phase worked great, has a digital meter on the front so you can see amps and voltage, it comes with about 4 feet of imput power cable, , the serial number starts with KB that makes it a 1991 they (the weld repair shop) gave it a though check and said it was working very well, only one thing was found, one of the contactors had some dirt in it so when you powered it up it chattered a little bit, they used electrical cleaner and blew it out with air, and that stopped the chatter, I powered it up several times since then and a very light hum can be heard "somtimes",
unit has scratches and scrapes on it, as you can see in the pic IT LOOKS LIKE ITS BEN USED IN THE INDUSTRY THAT IT WAS BUILT TO BE USED IN, what iam saying is it looks used, not abused,
i will put insurace on this unit, it protects both of us,
