Iowa Industrial Moderated Newsgroup For Surplus Equipment > Manufacturing Equipment
> Vises
> New
> Roper whitney jensen pexto 8TON punch press deepthroat
Roper whitney jensen pexto 8TON punch press deepthroat
please scroll down and view all the photos.
The title is not a complete description so please read the ad description.
new lower price with tooling !!
Whitney Jensen model 34 8 ton lever punch press.
Model 34 is one of the largest hand or kick type punch press made, most are only 4 tons.
Punch has ram straps to prevent c frame yawn when punching heavy material. This can easly be removed if not needed.
* This lever press provides power press capacity with manual press economy for prototype and short run work. Their large throat openings accommodate a wide variety of part sizes and shapes.
* Maximum Rated Capacity:* 8 tons
* Standard and deep throat models
* Weighs 735 pds MACHINE ONLY
Hole Size vs. Material Thickness
Maximum Rated Capacity
All punching tools have their maximum capacities for safe, dependable operation over a long life span. Tools listed on this site have a "rated capacity" based on their design strength. Before selecting a tool, use the charts (selectable in the left hand navigation bar) to determine the specific tonnage required to punch the size and shape holes through the type and gauge metal considered. These figures are for flat punch points. Shear on the punches will reduce the tonnage required.
Tooling ia available from roperwhitney.com
Dia. of punch shank hole in ram
Depth of punch shank hole in ram
24" deepthroat punch that you can punch to center of 48'' sheets..
Whitney Jensen, Roper Whitney and Roper pexto have changed names over the years but the machines are all the same.
Item is in good working order .
Tooling can be purchased from roperwhitney.com
These toggle action foot presses offer the distinct advantage of freeing both hands to position the stock, as well as providing close, nearly effortless control of the punching cycle. The throat depth allows you to punch 18 inches from the edge of the material.
* Maximum Rated Capacity:* 5 tons
Tonnage chart for reference
Chart #1 Tons of Pressure Required to Punch Mild Steel
Hole Size vs. Material Thickness
All punching tools have their maximum capacities for safe, dependable operation over a long life span. Tools listed on this site have a "rated capacity" based on their design strength. Before selecting a tool, use the charts (selectable in the left hand navigation bar) to determine the specific tonnage required to punch the size and shape holes through the type and gauge metal considered. These figures are for flat punch points. Shear on the punches will reduce the tonnage required.
Questions email or call BOB (***)-392-5055
You are welcome and encouraged to view items in person.
Most items have a warranty check ad for policy in none is lited then the following applies.
All items are sold "AS - IS, Where - IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item.
