Iowa Industrial Moderated Newsgroup For Surplus Equipment > Painting Equipment
> Brushes
> Everlast CUT50D 50AMP plasma cutter 110/220V CUT50
Everlast CUT50D 50AMP plasma cutter 110/220V CUT50
EQUIPPED WITH TOSHIBA MOSFET
208/220vac 50/60HZ Input Single Phase 1PH
110/120vac 50/60HZ Input Single Phase 1PH
230V No Load Voltage, 100-115V Working Voltage
3" Per minute @ 1" Steel (Severance Cut)
7" Per minute @ 3/4" Thick Steel
17" Per minute @ 1/2" Thick Steel
High Frequency and Contact Start:
High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. This 50amp Inverter Plasma cutter cuts like a 60amp standard DC plasma cutter! High Frequency Plasma cuts faster with less distortion in your metal.
100% Duty cycle (cut time) at 40amp cut
60% Duty cycle at 50amp cut setting
Air requirements: 60-75psi @ 4.5cfm
Internal High Speed Cooling Fan to Regulate Temperature
Has built in Thermal & Overload Protection
Dimensions: 15"Length X 9"High X 6"Wide
* Air Regulator with Bracket
Please take a look at the picture of all accessories.
Increase »Increase »Increase »Increase »Increase »
!! Guaranteed against dead on arrival or we will exchange it free of charge !!
IF YOU NED TO DOWNLOAD OWNERS MANUAL CLICK HERE
* For returns, contact must be made within 48 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately. However, the damage must be reported within 48 hours of delivery
* DOA items: In an even you will get non working unit , we will exchange it free of charge.
* Items returned must be in an unused condition. We will inspect all returns before accepting the package. We will not accept packages that are not in original packaging, have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Ifyou have any questions contact us via email at: EVERLAST_INC@HOTMAIL.COM OR (650)588 8588 x 201
