Iowa Industrial Moderated Newsgroup For Surplus Equipment > Industrial Machine Repair
> Components
> Needing Repair
> Honeywell L4103A1019 high limit aquastat 100-240F
Honeywell L4103A1019 high limit aquastat 100-240F
L4103A1019 High Limit Aquastat Controller with 100 F to 240 F operating temperature and 7 F ¦4 F Differential
The L4103A is an immersion-type controller for oil-fired water heaters. The Aquastat® Controller senses water temperature and cycles the burner through the oil primary. The high-limit controller breaks the circuit to the burner on a temperature rise past the factory-set setpoint.
• L4103A,B,C have a sensing element and a high limit sensor with automatic reset.
• Mounts on a horizontal immersion well in water heater wall.
• Adjustable temperature setting scale.
• Fluid-filled element operates SPST, Micro Switch™ snap-acting switch.
• Integral, nonadjustable high limit. L4103C is an immersion controller for gas systems.
• L4103A,B is an immersion controller for oil systems.
High Limit Aquastat Controller with 100 F to 240 F operating temperature and 7 F ¦4 F Differential
SPST, contacts break on temperature rise.
Operating Temperature Range (F)
100 F to 240 F stop set at 150 F (Scale marked- Hot-Normal-Warm)
Operating Temperature Range (C)
38 C to 116 C stop set at 66 C (sCale marked- Hot-Normal-Warm)
4 3/32 in. wide x 3 7/8 in. high x 2 11/16 in. deep.
104 mm wide x 99 mm high x 68 mm deep.
Mounts on a horizontal immersion well in water heater wall.
Approvals, Underwriters Laboratories Inc
UL Component Recognized: File No. MP466, Guide No. MBPR2.
