Iowa Industrial Moderated Newsgroup For Surplus Equipment > Industrial Machine Repair
> Miller dynasty 350 tig runner w/torch acdc tig 951062
Miller dynasty 350 tig runner w/torch acdc tig 951062
YOUR SOURCE FOR WELDING SUPPLIES
WELDING EQUIPMENT - SAFETY SUPPLIES
ARCAIR SLICE PACKS - LENCO SPOT
Miller Dynasty 350 Tig Runner PackageTig
Superior Arc Control-More Power
* Improved arc performance-highest quaility achievable TIG welds
* Increased output 5-350 amps with the NEW Dynasty 350 ( 50 amps more than previous models)
* Improved duty cycle-300 amps at 60%
* Increased power efficiency by 9%
* Covenient input power with Auto-Line technology
* Tig Runner package available with new cooling system designed for ultra reliability with extra cooling capacity
Achieve the Highest Quaility Tig Welds
The new Dynasty 350 now matches the superior arc quality of the Dynasty 700. It has the addition of four wavefourms from witch to choose for easier aluminum welding and independent AC Amperage Controls that allow the EN and EP amperage values to be set independently . This allows for a pointed tungsten providing more precision , deeper pentration and faster travel speeds. The weld performance of the Dybasty 350 are unbeatable by any other TIG machine ,ecpecially for aluminum applications.
More Power for Welding Thicker Materials
The Dynasty 350 comes standard with Miller's convenient Auto-Line technology,which allows the machines to be connected too any primary input voltage anywhere in the world while using half the power of a conventional transformer machine.
* 120 Volt auxillary power receptacle for cooling or small tools
* Wind Tunnell Technology protects internal electrical components from airborne contaminants ,extending the product life.
* Fan-On-Demand power source cooling system operates only when needed, reducing noise,energy use and the amount of contaminants pulled thru the machine.
* Progammable start parameters allow independent starting conditions based on process and memory selections (amperage,time and polarity).
* Program Memory features 9 independent program memories that maintain/save your parameters.
* High Frequency arc starter for non contact arc initiation.
* Lift-Arc starts provide AC or DC arc starting without the use of high frequency.
* Auto-Postflow caculates the length of postflow time based on the amperage setting. This eliminates the need to independently set the postflow time for different amperages. This feature preserves your tungsten and prevents porosity.
* Tailored arc control (DIG)allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer,more penetrating 6010.
* Hot Starts adaptive control provides positive arc starts without sticking.
* AC frequency control adds additional stability when Stick welding in AC for smoother welds.
* Independent Amplitude /Amperage Control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
* Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN)which is essential for high quaility welds on aluminum.
* AC frequency (20-400 hz) controls the width of the arc cone and the force of the arc.
Advanced Squarewave ,fast freezing puddle, deep penetration and fast travel speeds.
Soft Squarewave for a soft buttery arc with maximum puddle control and good wetting action.
Triangular wave reduced the heat input and is good on thin aluminum . Fast travel speeds.
* Exceptionally smooth and precise arc for welding exotic materials
* High-Speed DC TIG Pulse Control Pulse frequency capable of pulsing 5000 pulses per second.Pulsing adds arc stability, reduces heat input and warpage and can increase travel speeds. Other parameters include peak amperage , peak time and background amperage.
Miller TIG Torch Pkg. - 310 Amp Water-Cooled
* 25 ft (7.6 m) Weldcraft CS310 TIG torch
* Smith regulator/flowmeter HM2051A-580
* 12 ft (3.7 m) rubber gas hose (regulator to machine)
* Water-cooled Dinse Torch adapter
* 12 ft (3.7 m) 1/0 weld lead with clamp (work or ground lead) and Dinse connector
DOWNLOAD MILLER LITERATURE SHEET FOR DYNASTY 350
___________________________________________________________________________________________________
B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
(***)-783-3073 FAX (***)-934-3057
Hours : Mon-Fri 8-5 Sat 9-12 EST
Email questions to : ****@radix.net
we only accept wire transfers. Please call for our banking info.
Personal checks take 2 weeks to clear
