Iowa Industrial Moderated Newsgroup For Surplus Equipment > Manufacturing Equipment
> Drills
> No Warranty
> Power adapter: 12 volt 4 amp (12V 4A) dc supply lcd
Power adapter: 12 volt 4 amp (12V 4A) dc supply lcd
Output: 12.0 volts DC 4 Amps 48 Watts
Input: 110/240 volts AC. 50-60 Hz
This Item is available wholesale.
This power supply will be ideal for any 12V DC item, including LCD Screens, audio and video devices, recording equipment, R/C, digital cameras, and any other electronic device that requires high quality stable DC power. This adapter will protect your valuable electronics from both spikes and dips in power, and will shut itself down if the power becomes unstable. It is then reset by being unplugged and replugged in. It is vastly superior to cheap look alike adapters, and normally retailes for about 50 U.S. dollar.
About the Connector: Conector Size: 5.5mm (Outside barrel)x 2.5mm (Inside Barrel)
This adapter has a standard connector (DC Plug) for a 12V 4 Amp device. It will work with almost any device which matches this power rating. If it does not, you can send it back for a refund. (See "Return Policy" Below)
About selecting the correct power adapter:
Amperage: Amperage (amps) represents the maximum draw that your item requires. You must select an adapter that has the same, or HIGHER amp rating than the device you need it for. It is good to use an adapter that puts out more power than your device draws, this way the adapter will run cooler and more stable. Running a 3 amp device on a 4 amp adapter means the adapter will not have to work as hard.
Voltage: The voltage (V) of the adapter has to be an exact match with the rating of the unit you want to use it with.
˙Short circuit protection on all outputs
˙100% Burn-In tested at full load