Iowa Industrial Moderated Newsgroup For Surplus Equipment > Painting Equipment
> Spray Painting
> No Warranty
> Noyes ** OPM4-2D ** optical power meter 850/1300/1310/
Noyes ** OPM4-2D ** optical power meter 850/1300/1310/
..NOYES ** OPM4-2D ** OPTICAL POWER METER 850/1300/1310/BRAND NEW NEVER USE SET REFERENCE & WAVE ID DETECT
OPM 4 - Adds Wave ID & Set Reference
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables.
The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or μW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status.
The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately.
The OPM 4 is fully N.I.S.T. traceable.
OPM 4 - Adds Wave ID & Set Reference
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables.
The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or μW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status.
The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately.
The OPM 4 is fully N.I.S.T. traceable.
Multimode or single-mode applications
Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
Wave ID - automatic wavelength identification and switching
Passive Optical Networks (PON) testing
270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
Power measurements in dBm or μW; insertion loss in dB
AA alkaline, optional rechargeable NiMH battery pack or AC adapter
POWER METER, 850/1300/1310/1550, +6 to -60, SET REFERENCE & WAVE ID DETECT
Adapter caps: order separately (ST, SC, FC, and others available)
Includes protective rubber boot, 9-volt battery, carrying case and manual. The 9-ounce meter and measures 5.5" x 3.2" x 1.5". One-year warranty
Move mouse over images to see enlarged version
Certain images/photos are the copyrighted property of JupiterImages and are used with permission under license.
