Iowa Industrial Moderated Newsgroup For Surplus Equipment > Painting Equipment
> Spray Painting
> Used equiptment
> Waterlox bloxygen 1 can (0.34 oz) (2-pack)
Waterlox bloxygen 1 can (0.34 oz) (2-pack)
BLOXYGEN is a pressurized can of inert gases that prevents Waterlox and other oil based finishing liquids from drying out during storage. Use all your finish, not just the first half Eliminate spray gun clogs and jams Reduce your hazardous waste / product loss Avoid paying a premium for small volumes of finish Improve the quality of the final application Prevent changes in product chemistry during storage Save time by making finishing projects easier and cleaner Store your leftovers safely, in the original, labeled container PROBLEM: Oil-based products dry and harden by absorbing oxygen. When we store these products, the oxygen that's sealed in the container continues to cure and thicken the product, eventually forming a skin over the top. This skin is wasteful, time consuming, and messy to remove. Sometimes, hardened particles can clog spray guns, run the final finish, or destroy the remaining liquid. SOLUTION: Simply, we need to prevent any oxygen from reacting with the finish. By using a blanket of protective gas to purge the container, you can store your finish safely and use ALL your finish, not just the first half. HOW DOES IT WORK? Bloxygen uses a special blend of inert gases to drive the oxygen out of your container. Simply blow the oxygen out of your container with Bloxygen and then seal the lid. The heavy, inert Bloxygen gases sink down to block oxygen from the liquid surface. Because Bloxygen is heavier than air, it will separate the liquid surface from any air that may remain in the container. BENEFITS Use all your finish, not just the first half Eliminate spray gun clogs and jams Reduce your hazardous waste / product loss Avoid paying a premium for small volumes of finish Improve the quality of the final application Prevent changes in product chemistry during storage Save time by making finishing projects easier and cleaner Store your leftovers safely, in the original, labeled container APPLICATIONS Use BLOXYGENtm anytime you are storing: Fine Finishes Oil-based Paints Varnishes Oil-based Stains Resins Paste wood fillers Polyurethanes Oil-based Inks Photography Chemicals Polished Metals BLOXYGEN will NOT HELP problems with WATER-BASED FINSIHES or LACQUER. These products don't cure via oxygen absorption.
